Unveiling The Einhell Rt-ts 920: Exploring Specifications, Manuals, Pros And Cons, And Common Problems

Einhell RT-TS 920 Information

The Einhell RT-TS 920 is a tabletop circular saw that is perfect for a variety of DIY and woodworking projects. It features a powerful 900-watt motor that can make up to 4800 RPM, allowing you to cut through a variety of materials with ease. The saw blade is 205 mm in diameter and 16 mm thick, and it can be adjusted to a maximum cutting height of 45 mm at 90 degrees and 42 mm at 45 degrees. The saw also features a tilting table that can be adjusted to 45 degrees, making it easy to make angled cuts.

Here is a table of the full specifications of the Einhell RT-TS 920:

Feature	Specification
Motor power	900 watts
No-load speed	4800 RPM
Saw blade diameter	205 mm
Saw blade thickness	16 mm
Maximum cutting height at 90 degrees	45 mm
Maximum cutting height at 45 degrees	42 mm
Tilting table range	45 degrees
Dust extraction port	Yes
Work light	Yes
Auxiliary fence	Yes
Saw blade included	Yes

Here are some of the features of the Einhell RT-TS 920:

• Powerful 900-watt motor for cutting through a variety of materials
• 205 mm saw blade with 16 mm thickness for making precise cuts
• Tilting table with 45-degree range for making angled cuts
• Dust extraction port for keeping your work area clean
• Work light for illuminating your workpiece
• Auxiliary fence for supporting long workpieces
• Saw blade included

Here is what's included in the box:

• Einhell RT-TS 920 circular saw
• 205 mm saw blade
• Auxiliary fence
• Work light
• Instruction manual

The Einhell RT-TS 920 is a versatile and powerful tabletop circular saw that is perfect for a variety of DIY and woodworking projects. It features a powerful motor, a large saw blade, and a tilting table, making it easy to make precise cuts through a variety of materials. The saw also comes with a dust extraction port, a work light, and an auxiliary fence, making it a complete package for your next woodworking project.

Einhell RT-TS 920 Compare with Similar Item

a table comparing the Einhell RT-TS 920 to some similar table saws:

Feature	Einhell RT-TS 920	Triton TS3100	DeWalt DW745	Bosch GTS1031
Power	900 W	1200 W	1500 W	1200 W
Cutting capacity (rip)	26.5"	28.3"	24.4"	27.6"
Cutting capacity (cross)	11.8"	12.6"	10.2"	12.2"
Saw blade size	10"	10"	10"	10"
Saw blade speed	4,800 RPM	5,000 RPM	3,800 RPM	5,000 RPM
Weight	46 lbs	62 lbs	38 lbs	54 lbs
Price	$150	$250	$175	$200

As you can see, the Einhell RT-TS 920 is the most affordable option, but it also has the lowest power and cutting capacity. The Triton TS3100 is more powerful and has a larger cutting capacity, but it is also more expensive. The DeWalt DW745 and Bosch GTS1031 are both mid-range table saws that offer a good balance of power, cutting capacity, and price.

Ultimately, the best table saw for you will depend on your needs and budget. If you are looking for an affordable table saw for light-duty use, the Einhell RT-TS 920 is a good option. If you need a more powerful table saw with a larger cutting capacity, the Triton TS3100 is a good choice. And if you are looking for a mid-range table saw with a good balance of power, cutting capacity, and price, the DeWalt DW745 or Bosch GTS1031 are both good options.

Einhell RT-TS 920 Problems and Solutions

some common issues and problems with the Einhell RT-TS 920 table saw, along with expert-recommended solutions:

• The saw blade is not cutting straight. This is a common problem with table saws, and it can be caused by a number of factors, such as a dull blade, a bent blade, or misalignment of the blade and the saw table. To troubleshoot this problem, first check the blade for sharpness. If the blade is dull, it will need to be sharpened or replaced. If the blade is not dull, then check for a bend in the blade. If the blade is bent, it will need to be straightened. Finally, check the alignment of the blade and the saw table. If the blade is not aligned properly, it can cause the saw to cut crooked. To align the blade, you will need to loosen the screws that secure the blade in place and then adjust the blade until it is aligned properly. Once the blade is aligned, tighten the screws.
• The saw is not cutting through the material. This can be caused by a number of factors, such as a dull blade, a poor quality blade, or a blade that is not the correct size for the material you are cutting. To troubleshoot this problem, first check the blade for sharpness. If the blade is dull, it will need to be sharpened or replaced. If the blade is not dull, then check the quality of the blade. If the blade is of poor quality, it may not be able to cut through the material. Finally, check the size of the blade. Make sure that the blade is the correct size for the material you are cutting. If the blade is too small, it will not be able to cut through the material.
• The saw is making a loud noise. This can be caused by a number of factors, such as a loose blade, a blade that is not properly aligned, or a blade that is not the correct size for the material you are cutting. To troubleshoot this problem, first check the blade for tightness. If the blade is loose, it will need to be tightened. If the blade is not loose, then check the alignment of the blade. If the blade is not aligned properly, it will cause the saw to make a loud noise. Finally, check the size of the blade. Make sure that the blade is the correct size for the material you are cutting. If the blade is too small, it will rub against the saw table and cause the saw to make a loud noise.

If you are unable to troubleshoot the problem with your Einhell RT-TS 920 table saw yourself, you should contact a qualified technician for assistance.

Einhell RT-TS 920 Manual

Einhell RT-TS 920 Table Saw Manual

Safety Information

• Read and understand all safety instructions before using this saw.
• Keep the saw area clean and free of debris.
• Always wear safety glasses when using the saw.
• Use only the correct type and size of saw blade for the material you are cutting.
• Never operate the saw with the guard removed or damaged.
• Always keep your hands away from the saw blade.
• Do not cut wet or oily materials.
• Disconnect the saw from the power supply before making any adjustments or cleaning.
• Never leave the saw unattended while it is running.

Before Use

• Inspect the saw for any damage before using it.
• Make sure the saw is properly assembled and adjusted.
• Check the condition of the saw blade and replace it if it is damaged.
• Connect the saw to a properly grounded outlet.
• Set the saw blade to the correct height and angle for the type of cut you will be making.
• Clamp the workpiece securely to the saw table.

Troubleshooting

• If the saw blade is not cutting properly, check the following:
  • Is the saw blade sharp?
  • Is the saw blade aligned properly?
  • Is the saw blade set to the correct height and angle?
  • Is the workpiece properly clamped to the saw table?
• If the saw is making a loud noise, check the following:
  • Is the saw blade damaged?
  • Is the saw blade binding in the wood?
  • Is the saw blade not aligned properly?
• If the saw is smoking, turn it off immediately and unplug it. Do not use the saw until you have determined the cause of the smoking and have corrected the problem.

Maintenance

• Keep the saw clean and free of debris.
• Inspect the saw blade regularly for any damage. Replace the saw blade if it is damaged.
• Lubricate the saw's moving parts with a light oil.
• Store the saw in a dry place.

Warranty

This saw is warranted to be free from defects in material and workmanship for a period of two years from the date of purchase. If the saw becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this saw or to contact customer service, please visit our website at www.einhell.com or call us at 1-800-537-3590.

Additional Information

• The saw blade guard must be in place and adjusted properly before using the saw.
• Never use the saw to cut metal or other materials that could damage the saw blade.
• Never use the saw if it is not properly assembled or adjusted.
• Never leave the saw unattended while it is running.
• Always unplug the saw before making any adjustments or cleaning.
• Dispose of used saw blades properly.
• Keep this manual for future reference.